How to Enable Microsoft Remote Desktop in Windows 10 Home Edition

by Chris Thomas on 22 August 2017 · 87880 views

If you're reading this you're probably aware that Microsoft Remote Desktop is disabled in Windows 10 Home edition and is only available in Windows 10 Pro and Enterprise editions. This can be very upsetting for those of us who want to create inbound remote desktop connections from other devices, especially with the cost of upgrading to the Pro version of Windows 10. Fortunately, there is a very quick workaround that you can do to bring the Remote Desktop feature to Widows 10 Home. Here's how:

Note: You cannot establish a remote connection with a Windows account that isn't password-protected. So if your Windows user account doesn't have a password, you'll need to create one before proceeding.

Step 1. Download RDPWrap

First, download the latest version of RDPWrapper from the developer's GitHub page:

https://github.com/stascorp/rdpwrap/releases/tag/v1.6

Step 2. Extract the Zip File Contents to a Folder on your PC

Use a program like WinRAR, 7-Zip, or jZip to the extract the contents of the .zip file to its own folder. In the screenshot below you can see I used the J-Zip context menu option by right-clicking the zip file and selecting the option below:

Step3. Run install.bat with Administrator Privileges

In the newly extracted folder, right-click on install.bat and then select Run as Administrator.

After the script has finished running successfully you should this message:

Step 4. Configure and Update the Remote Desktop Settings

Now you'll need to check the remote desktop settings configuration to see if everything is set up and ready to go. To do that, click on the RDPConf.exe file to open the RDPWrapper Configuration.

Once opened, you may find that there is a problem with the listener state, as shown in the red letters below:

If that's the case then you'll need to right-click on the update.bat file and select Run As Administrator:

When the script is done running, press any key to continue to complete the process. After that you should see that the listener state is now green and set to listening:

Step 5. Test the Remote Desktop Connection

Finally, run RDPCheck.exe to test the remote connection.

When prompted, click Connect.

Your user account login screen should show up, which indicates you've successfully enabled inbound Remote Desktop Connections on your Windows 10 Home PC.

If you ran into any problems or have questions about the process, feel free to leave your input in the comments section below.

Have you upgraded to Windows 10 yet? You can still do so, for free, by 31 December 2017.

#windows #how tos #microsoft #remote #remote desktop connection #windows 10 #enable

Comments (3)

madiblob on 17 Nov 2017

Report

This no longer works on Windows 10 home, unless you've been blocking windows updates for the last few months. I hate Microsoft.

chris on 22 Oct 2017

Report

@dgsblb - Make sure you are running the file named "update.bat" using the Run as Administrator option - NOT the RDPConf file. Also, make sure you close the RDPConf or RDPCheck programs completely before running the update.bat file as administrator. When you launch the RDPConf.exe again the listener state should then be green after you've run the update.bat file as administrator.

dgsblb on 23 Aug 2017

Report

I followed these instructions precisely but the listener state still reads "Not listening". Any suggestions? I'm using Windows 10 Home Edition, and the only account is password protected.

< PREVIOUS ARTICLE
How to Run iOS in Windows 10 and Use iPhone/iPad Apps on Your PC

NEXT ARTICLE >
VPN Service Providers Who Offer a Free or Paid Trial Period