SimplyCam Icon

SimplyCam 3.66

Developed by - Windows - setup file simplycam3.zip (1.79 MB) - Shareware
Buy or select mirror:

MD5: cfed76fb96526d7e2be7e876057368e7

All files are original. Download3K does not repack or modify downloads in any way. Check MD5 for confirmation.

Developer Description

"SimplyCam is an integrated 2d CAD/CAM system."

SimplyCam is a fully integrated 2d CAD/CAM system that can directly open, create, edit and save drawings in industry standard DXF format.
SimplyCam also convert raster images (Bmp and Jpeg) to vector by drawing centerlines and outlines.
SimplyCam allows to manipulate vector (Scale, Rotate, Mirror, Move, Offset), to create cad drawing with Line, Rectangle, Arc/Ellipse, Polyline and Spline and to modify the drawing with Fillet, Trim, Break, Extend and Explode block function.
SimplyCam also converts any True Type font into vector.
SimplyCam can use up to 256 layers. The following properties can be applied to each layer: color, pen width, visible and move entity from-to layer.
SimplyCam now provide CNC Gcode for Milling, Routing, Water Jet, Laser and Plasma.
SimplyCam can import NC programs and simulate it. Only reads the G0, G1, G2, and G3 commands for conventional milling.
SimplyCam included great number of open post-processor such as:
AutoGrav, Fanuc, Fadal, Haas, Heidehain, Iso, Mach2/3, MaxNc, Selca, Siemens, ShopBot, Tecno-Isel, TurboCnc....

Requirements: Pentium/Amd >300 MHz, True color Video Card (24-bit) - 800 x 600

Antivirus information

Download3K has downloaded and tested SimplyCam on 16 Sep 2024 with some of Today's best antivirus engines and you can find below, for your convenience, the scan results:
  • Avast:

    Clean
  • Avira:

    Clean
  • Kaspersky:

    Clean
  • McAfee:

    Clean
  • NOD32:

    Clean
SimplyCam Antivirus Report
User rating
3.5/5 (5 votes)
Good
Your rating